Technical Spec: -General-
Interface: Fully I2C controllable, seamlessly switch between source and sink
Input Voltage: 16-24V
Current Sense: Gound Side, 20miliOhm sense resistor
-Current Sink Section-
Type: Closed loop current sense, high error amplification gain, fast sinking current correction
Maximum Current Sink: > -4A
Minimum Current Sink: 0mA
Sink Current Stability: Within 5% variation of sink current
Resolution: ~50mA per increasement, up to maximum current sink/sources
-Current Source Section-
Type: Buck Topology, closed loop current sense, bootstrapped high side N-Channel drive
Maximum Current Source: >5A
Minimum Current Source: 0mA, first step is ~200mA
Regulation Stability: Within 5% of output current, variation less than 50mA
Resolution: ~50mA per increasement, up to maximum current sink/sources
Temperature Stability: N/A (not tested)
Bulk Source Efficiency: >90% at 50-60% duty cycle
Transient Response: N/A (not tested, but in the catogory of considered slow
Switching Frequency: 200KHz
Ripple Voltage: less than 1v
Laboratory equipment, suitable to charge/discharge smart battery, can work together with microcontroller through I2C to modify the output current according to the aplication need.
No comments:
Post a Comment