1. Some customer have hesitation about posting their battery to us sometime. One of the reason is their private information (name, address) is needed during the e-trade.
2. Actually, we won't use those information on any others kind of activity except sending the battery back to you. Seriously this is some kind of unlawful behave if one misuse the personal information give by their customer without the agreement of the owner.
3. We promise to give you the finest goods at the performance and the price agreed or even better replacement if particularly good is out of stock. You are always welcome to complain if you pay for RM200 and get only sometime worth RM100.
Welcome:
Welcome to Alternative Battery Enterprise weblog, Alternative Battery Enterprise is a small business based in Malaysia, that realt/refill/recell or even repair your laptop and notebook battery.Thursday, 22 January 2009
Saturday, 10 January 2009
Battery Repair
Sekarang, RM60 untuk membaiki bateri notebook anda yang telah ditukar sel baru! Jika anda telah tukar cel di dalam, tetapi bateri itu tidak berfungsi setelah digantikan sel dalamnya!
Jika sebelum anda tukar sel dalamnya, ia berfungsi, maka adanya jalan untuk mambaikinya. Kami membaiki kebanyakan bateri yang tidak dapat dibaiki oleh yang lain! Jadi, kenapa tidak cuba guna perhikmatan ini untuk membaiki bateri anda?
Untuk pertanyaan tentang suatu model bateri tertentu boleh dibaiki atau tidak, sila hubungi kami dengan emel atau pangilan talifon.
-------------------------------------------------
您刚自己换了电芯的笔记本电池不工作？现对外提供笔记本电池解锁服务！只须RM60。
只要你在换电芯之前，电池是工作的，都有很大的机会可以再次修复！
就算你在换电芯之前，电池是不工作的，只要不工作的主要原因是电芯损坏（内部PTC切断、短路等），没有次要原因，同样有很大的机会可以再次修复！
我们拥有足够的工具检查出问题所在，只有少数的特殊电池没有办法处理。欢迎电邮/来电查询单一型号可否修复。
-------------------------------------------------
Now, RM60 to repair your re-celled battery! If you have recell(reload a new group of new/used cell) your battery, but it don't work (it actually working before you send to repair) or not work properly, just send it to Alternative Battery. RM60 to make it work! Performance will depend on the cell you have change.
Besides, now we have width range of cell to select, just let us know you budget. Tell us your battery model we will let you know if it can be fixed. Just to ensure you get a working battery.
Alternative Battery Enterprise have own engineered tools needed to check and configured the battery properly. Many battery that can be repaired by us not even be supported by the hottest custom battery repair tools that widely available in the global market.
Our tools and equipment can check most of the smart battery in the market, included SMB, IIC, IBA, ONEWIRE interface. Rate of a battery being success to be repaired is more likely>90%. Therefore, all the customers get their battery with full satisfaction!
Jika sebelum anda tukar sel dalamnya, ia berfungsi, maka adanya jalan untuk mambaikinya. Kami membaiki kebanyakan bateri yang tidak dapat dibaiki oleh yang lain! Jadi, kenapa tidak cuba guna perhikmatan ini untuk membaiki bateri anda?
Untuk pertanyaan tentang suatu model bateri tertentu boleh dibaiki atau tidak, sila hubungi kami dengan emel atau pangilan talifon.
-------------------------------------------------
您刚自己换了电芯的笔记本电池不工作？现对外提供笔记本电池解锁服务！只须RM60。
只要你在换电芯之前，电池是工作的，都有很大的机会可以再次修复！
就算你在换电芯之前，电池是不工作的，只要不工作的主要原因是电芯损坏（内部PTC切断、短路等），没有次要原因，同样有很大的机会可以再次修复！
我们拥有足够的工具检查出问题所在，只有少数的特殊电池没有办法处理。欢迎电邮/来电查询单一型号可否修复。
-------------------------------------------------
Now, RM60 to repair your re-celled battery! If you have recell(reload a new group of new/used cell) your battery, but it don't work (it actually working before you send to repair) or not work properly, just send it to Alternative Battery. RM60 to make it work! Performance will depend on the cell you have change.
Besides, now we have width range of cell to select, just let us know you budget. Tell us your battery model we will let you know if it can be fixed. Just to ensure you get a working battery.
Alternative Battery Enterprise have own engineered tools needed to check and configured the battery properly. Many battery that can be repaired by us not even be supported by the hottest custom battery repair tools that widely available in the global market.
Our tools and equipment can check most of the smart battery in the market, included SMB, IIC, IBA, ONEWIRE interface. Rate of a battery being success to be repaired is more likely>90%. Therefore, all the customers get their battery with full satisfaction!
Monday, 5 January 2009
M520GBAT
Just for you information, this battery can be realt, no problem.
Sometime the fuse blow, replace the thermal fuse with working one. This is sometime very troublesome, if not done properly, the fuse will blow again! Especially if one not solder it fast, the heat from soldering iron can melt the conductor inside the fuse also, because it is a thermal fuse.
The primary purpose of this thermal fuse is to prevent battery keep operating if the MOSFET(the black chip below the fuse) is overheat. MOSFET can overheat if the main protection chip fail to detect an over current condition. MOSFET can also overheat if over current occur but the MOSFET itself shorted(not working).
Those fuse can also be intentianally blown by the controller circuit if the battery controller have a sense of cells over-heating or over-charged, that is why it have three leg, one is for control, connect it to ground will blow the fuse. But if the overheating occur due to short circuit inside the cells itself, cut off the supply of current to notebook won't prevent it from continously treat by overheat or even catch fire when reach a certain temperature treshhold.
Replace the cell with new one.
Connect the new cells to the circuit board and apply some silicone glue to the temperature sensor. The reason using silicone glue is it can withstand up to 400 degree Celsius. If using normal glue, it will melt when cell overheating occurring.
Great workmanship cause housing are open nicely.
This is first time I see QFN chip pakaging for the bq chip, normally is TSSOP.
TSSOP is long IC. QFN is smaller in size by around 20%.
Sometime the fuse blow, replace the thermal fuse with working one. This is sometime very troublesome, if not done properly, the fuse will blow again! Especially if one not solder it fast, the heat from soldering iron can melt the conductor inside the fuse also, because it is a thermal fuse.
The primary purpose of this thermal fuse is to prevent battery keep operating if the MOSFET(the black chip below the fuse) is overheat. MOSFET can overheat if the main protection chip fail to detect an over current condition. MOSFET can also overheat if over current occur but the MOSFET itself shorted(not working).
Those fuse can also be intentianally blown by the controller circuit if the battery controller have a sense of cells over-heating or over-charged, that is why it have three leg, one is for control, connect it to ground will blow the fuse. But if the overheating occur due to short circuit inside the cells itself, cut off the supply of current to notebook won't prevent it from continously treat by overheat or even catch fire when reach a certain temperature treshhold.
Replace the cell with new one.
Connect the new cells to the circuit board and apply some silicone glue to the temperature sensor. The reason using silicone glue is it can withstand up to 400 degree Celsius. If using normal glue, it will melt when cell overheating occurring.
Great workmanship cause housing are open nicely.
This is first time I see QFN chip pakaging for the bq chip, normally is TSSOP.
TSSOP is long IC. QFN is smaller in size by around 20%.
Subscribe to:
Posts (Atom)
